Bodum Coffee Makers & Espresso Machines - Page 5 - Recent Questions, Troubleshooting & Support

http://www.bodumusa.com/shop/line.asp?MD=6&GID=48&LID=196&HID=1508%2D10&CHK=&SLT=&mscssid=QK5J2PXP36MX9N12RBJTNKT4H1SAF3X0

Bodum has several websites; pick the closest country here:

http://www.bodum.com/


On the USA site there is a C-Mill available for $25.95 USD:
http://www.bodumusa.com/shop/line.asp?MD=1&GID=29&LID=310&CHK=&SLT=&mscssid=DEP02QHPXTQB9HGT2015H4DLF3A030Q5


Instructions are here:

http://www.bodumusa.com/shop/en/info04/pdf/05_5679IM_C_Mill_INS.pdf

There does not seem to be any replacement parts available or schematics. You might try contacting Bodum Customer Service as per the information on the countyr website closest to you.

Hi had the same problem. Probably it is the steam/hot water valve that leaks. I just bypassed it since you can not find it anymore & is from plastick, not reparable at all. Open top cover, see if at the right, where the handle to choose steam is the plastic valve is leaking or if it is covered with white powder (residu of calc of the vapourated water). If so this is the problem. Disconnect at te bottem of the valve the tube coming from the heater. (untighten the screw, pull tube out the hole, it is a sort of press fitting with a rubber ring) . Do the same with the connection on top of the heating blok and fit the first disconnected tube in it. No leak anymore. You can not have heated water or steam anymore. But coffee works again. Best is also to fix the staem handle into the neutral position, or disconnect the wires on the switches an put them permanently in the neutral status. (one switch is closed, the other is open. So nobody can trigger the steam anymore. Will not be ok since tubing is changed. Succes.