Blue Microphones Audio Players & Recorders - Recent Questions, Troubleshooting & Support
My wesc headphones wont play
more solder and shrink tube over the joints. Heat guns will shrink it down adding more strength and insulating at the same time. Slide the shrink over the wire before joining and soldering.
Bluebird mic wont work
Surely you have checked that the phantom power button (48v) is pressed to the ON position?
I am using pro tools
The mbox mini is usb powered, wont work without power so your mac or pc must be powered on and connected. The blue led will be on when powered. Assuming you have the the appropriate cables, you want to make sure the condenser is plugged into the Mic/Line input. (Input 1 on the back of the mbox mini). All condenser mics require phantom power, so engage the +48V switch. Also make sure the DI (direct input) switch is not engaged. The input gain control is located on the front of the mbox... There needs to be speakers connected to the 1/4 output jacks on the back of the mbox or headphones on the front for sound output. Use the large knob for monitor volume control.
In protools:
Create a Stereo Master fader track
Create a mono audio track
Set the input of the mono audio track to Mic/Line 1
Arm the track for record (click & make sure the R is red)
You should getting levels and sound output from your condenser.
The right ear of the headphone aint working its
I'm having the same problem over here...
At the store they told me i need to resold it? While i have no experience at this at al! :(
So it seems if you remove the foam ears at the side where the cable is entering you will see 3 little screws...
Next step is opening, but i can't help you any further than this... Sorry man i'm looking for a solutions my self!
Not finding what you are looking for?