Bionaire Dryers - Recent Questions, Troubleshooting & Support

Go to walmart and get a new one

Bionaire... | Answered on Jun 06, 2019

i bought a bionaire fan today and was looking at the manual the fuse is located at the end of the cord where it plugs into wall you have to open the square piece holding the prongs there you will see it good luck

Bionaire BW2300... | Answered on Sep 02, 2018

Contact Bionaire directly and request the color code.

Bionaire Dryers | Answered on Aug 12, 2018

There are no user serviceable parts in that fan.

Bionaire BT40... | Answered on Jun 30, 2016

The easiest way to to use pressurized air. Buy a can or use compressed air.

Bionaire... | Answered on Jun 22, 2016

The remote for Bionaire® 20" Ceramic Mini-Tower Heater with LCD Control uses BUTTON cells (Disc type, 3 volt, CR2025)..
Open the remote as shown in page 4

Bionaire... | Answered on Mar 17, 2016

These run very small motors with low "starting torque" If the fan hasn't been run for a long time, its possible that it has jammed up or got tight from just sitting there. Being careful, turn on the fan and spin it in its usual direction by hand, it should start running. If you cannot spin by hand, it may have seized up which will require you to strip and lube the motor. If you manage to get the fan spinning , let it run on high fan speed for an hour or so, it should free up and then be OK again. A small spray of WD40, CRC or similar spray can lube on the fan shaft where it disappears into the motor may assist.

Bionaire Dryers | Answered on Feb 03, 2015

Not finding what you are looking for?
Bionaire Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Bionaire Dryers Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Brad Brown

Level 3 Expert

18060 Answers


Level 3 Expert

5111 Answers

Are you a Bionaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides