Artronix Technology Artec - Recent Questions, Troubleshooting & Support
Derar sir recently I change
You will have to go the scanner manufactur and ask fort the WIN 7 Driver or it may already be on your original install disk.
5/5/2016 6:22:52 AM •
Artronix...
•
Answered
on May 05, 2016
Hi I want to purchase
This will mean the input on the first device is 120 V and input on the 2nd device is 230 V. Right? If so Yes you can use this if it belongs to the same scanner however you will have to plug the power into a 230 V Circuit. You cannot adjust, manipulate, change the Volts/Watts/Amps under any conditions. If the 203 V (Out put) plug is the same as the 120 V plug and there is a place to plug it in to the scanner then go for it. Volts/Amps/Wwatts/AC/DC are very specific to a specific device.
5/5/2016 6:20:57 AM •
Artronix...
•
Answered
on May 05, 2016
How i can scan multiple pages in one file ??
You need a document feeder. The printer has on or it doesn't. If it does you usually place the documents face up in the overhead feeder and the scan sensor in the printer will detect a load of paper in the feeder and choose to there instead of a single sheet under the glass.
5/5/2016 6:07:49 AM •
Artronix...
•
Answered
on May 05, 2016
I just bought this scanner and have windows vista
Hi,
How to get the Artec 1236USB/Ultima 2000 scanner working in Windows
Vista. Note that this how-to skips the various UAC prompts that occur
throughout the process.
1. Right click on the Setup executable (whatever the name is, also
assumes the full 22MB file) and then select the Compatibility tab. Set
compatibility settings to Windows XP (Service Pack 2), and set the
program's Privilege Level to run as administrator.
2. Install the scanner drivers and reboot the computer.
3. Go into Control Panel, select System, then select the Device Manager.
Select the scanner, which should appear as an unknown item on the
list. Right click on the unknown and select Properties, then select the
Driver tab. Select the Update Driver button and let it search for the
Artec drivers. A warning will appear regarding the lack of a digital
signature. Tell Windows to install the driver anyway.
4. Reboot computer.
5. Search for Scan32.exe or open an Explorer window and drill down to c:\windows\twain_32\artecusb\.
6. Right click on Scan32.exe and select the Compatibility tab. Set
compatibility settings on scan32.exe to Windows XP SP2 and make sure the
executable can run as an administrator.
7. If desired, repeat this process with ScnPanel.exe in c:\program
files\artecusb\scanpanel\. My personal opinion is that ScnPanel.exe is
redundant, the aforementioned scan32.exe file being far more flexible.
It only serves to use up resources, so I wouldn't bother with making the
file compatible and would just remove it from the Startup group.
8. Start scanning.
Hope this is helpful and fix the issue.
Thank you for contacting FixYa
*Please rate this solution with a thumbs up
11/16/2010 11:46:52 PM •
Artronix...
•
Answered
on Nov 16, 2010
I HAVE NOT USED MY SCANNER FOR AWHILE, AND HAVE
Check if you have to install anything required for its working. If not disconnect it, restart the system and connect it again. The system will automatically detect it and install all the necessary things and will provide you proper messages during the course.
If the windows fail to detect the device, there is something missing. May be a connection problem or something to install. You told that it was not used for a while. So probably, your connection wire may be not working or jammed. Try with another fresh connecting wire. That may do.
4/14/2010 6:00:34 PM •
Artronix...
•
Answered
on Apr 14, 2010
Cant find drivers for my artec ultima 2000 scanner
Here is a link to the drivers you are looking for. Sorry, the web site requires a login so you have to register but its free and this site is great for older drivers.
Hope this helps.
http://members.driverguide.com/index.php?action=dosearch&qm0=Artec+ultima+2000+scanner&sm=s&si=77c50878bd492be2a0388fcdb524bd1a&st=1257602417&gqm0=Artec+ultima+2000+scanner
11/7/2009 2:03:31 PM •
Artronix...
•
Answered
on Nov 07, 2009
Not finding what you are looking for?