Arrow Fastener Tools & Hardware - Others - Recent Questions, Troubleshooting & Support
My arrow fastener model t-50m is jammed how do I remove the few
I have a similar issue with my T50m stapler. To remove the staples unscrew the locking nut near where you load the staples and remove the tapppered bolt. The track will lift out and the staples can be easily removed. Why this is happening is unknown to me also. I purchased a new gun.
Contact Safety trigger only works intermittently
There should be an adjustment screw that sets the guard (contact safety) movement needed to allow actuation. Sounds like that screw is loose or fell out. That screw positions a rod that pushes a limit switch inside the tool. Look for an exploded assembly drawing showing the parts in your manual.
Need to get new pressure
http://www.amazon.com/Arrow-Fastener-Staple-Parts-PK50/dp/B00004Z2IG/ref=sr_1_10?s=power-hand-tools&ie=UTF8&qid=1307995590&sr=1-10 hope that helps.
How much should good scaffold brick guards cost me?
These should be expensive, but they are nothing of the sort. You can pick up quality scaffold brick guards online for as little as £3.99. I use a company called
BrikGard because they use 100% recycled plastic scaffold brick guards. I like to be as environmentally friendly as possible without compromising quality or increasing the purchase cost too much. Given that their brick guards are so cheap and made from 100% recycled plastic, I feel safe using them. Also, anyone working on-site should consider using a brick guard because it offers that extra layer of peace of mind so you can get focused on the job without worrying about things like falling debris coming down and striking you. For affordable scaffold brick guards, I would check out BrikGard.
Not finding what you are looking for?