AOpen Computers & Internet - Recent Questions, Troubleshooting & Support

use ipconfig on that pc command prompt

show this. old PC have dead coin, 1st things first then see the model here, mx3w here, a true relic 20 years old

aopen ended 2011 support so only googling works learn to ?

learn to google, old PCs , as yours seems to be t ATX form factor and 250w to 500 watt ATX PSU that has bundles of IDE 4pin molex connecters there will work. legacy PSU. any will work. that era (IDE-PATA)

support ended at Aopen in 2011 best is leave bios firmware alone. and not brick the PC. bios settings are lost when the RTC coin cell is dead, aid is this old

no pc told at all the monitor power blink if PC dead or in standby

that means the PC is dead or in standby on most monitors no pc told at all so no joy

buy it install it or fix it? well make ended all support 2011 proof hard https://web.archive.org/web/20111001000000*/aopen.com

it's gone https://web.archive.org/web/20111001000000*/aopen.com

https://web.archive.org/web/20111001000000*/aopen.com all support ended 2011. gone with the wind.

aOpen and MS both ended support on XP aopen ended it 2011. so is all gone that i915Gm and intel ended this too, see why here shows when it died , maker and see all FTP driver links there DOA. forever. https://web.archive.org/web/20111001000000*/aopen.com XP is virus magnet time to buy i3 up PC. 2010 up. and win, and run w10 free. ask how. or just do it.

first get unstated monitor work and on bios screens the RTC coin cell is dead. so is show stopper that. remove all PCI and AGP card use only the igpu VGA mobo jack to mon. booting and OS is always last, first is screen not dead then Aopen PC splash screen then POST errors and BIOS PAGE all work and are not dead this is first. on all PCs. (win-tel.) the board is a pure relic worth zero. now/.

english HOW TO CONNECT THE POWER BUTTON CABLES TO MY MOTHERBOARD?I disconnected the cables and now I don't know what order they go in. so find the relic manual but maker is dead after 2011. for mobo. google 4th hit bingo, page 32 .pin 11 to 12, spwr. across from 1. gray pins? a 20 pin header and not key so finding pin1 is job 1. do not short the +5vdc pins there,!!! the via chip sets are pure junk, avoid,VIA, SIS and Nforce mOBO. go intel i3, up. https://theretroweb.com/uploads/mobos/aopen-mk77m-ii/mk77m2.pdf

aopen is mostly dead, for all that old stuff as seen here 2011 dead https://web.archive.org/web/20111001000000*/aopen.com

they are mostly dead now. but proof is here. https://web.archive.org/web/20111001000000*/aopen.com

French to ENG I am formatting my computer only. (NONE TOLD) XP? I'm looking for my driver CD but I can't find it (lost the CD) A75P IS ONLY A MONITOR AND NEEDS NO DRIVER EVER. the PC matters only and the VGA port used , correctly . the VGA port needs the driver, and then any VGA monitor on earth works but this A75p is limited at .max.1280 × 1024 pixels on the PC do F8 safe mode and set resolution to above. then reboot and now the CRT works right. the drivers at aopen are now gone, and ended in year 2011. so we all know why you get lost there, as it is DEAD there. there was an old inf file for the monitors but is not needed ever. DDC+ eDID , plug and play magic does this for decades now./. the GPU driver asks the monitor what it can do, via, DDC pin comms and is then set to max. or do so by screen settings or F8

the last CRT on earth lives? can you post in English. you said I have an aopen a70p monitor that looks half greenish in full screen It is a new crt monitor, so it looks greenish in full screen applications, that is, the gray is rather dark green, so I would like to see if modifying something solves that problem. well it is not new at all (to you maybe) but is not new it is old and if fails on 2 PC the monitor CRT is bad. the guns RGB can be adjusted to get color balance try settings RGB (red, green , blue) gun drive. CRT this is a 2004 CRT monitor and is not new, at all. 8 years old in your hands, if your tech, replaced the TUBE, and forgot to tune the RGB drive levels that is his problem, take it back read this page and do it. (color balance) btw: old CRT love to go weak on RED so we boost that. https://www.manualslib.com/manual/1566003/Aopen-A70pf.html?page=8&term=adjust&selected=6#manual

Aopen ended all support for these in 2011. gone , kaput , nada. proof here. https://web.archive.org/web/20111001000000*/aopen. XP is a virus magnet , avoid like the plague.w95 to XP and vista bad. an echo is here. https://www.manualslib.com/manual/1050233/Aopen-Ax4sg-U.html 1st google hit, too.

NO it is not. xp to 7 skips vista, and bad to the bone that. and 8 year jump and fail. Aopen ended all support for these in 2011. gone , kaput , nada. proof here. https://web.archive.org/web/20111001000000*/aopen. XP is a virus magnet , avoid like the plague. last guy running XP ? why not call you ISP and end dialup for ever, some even have low speed deals for the guy with wife and 10kids.

NO PC told\no CD drive model told.no told how it connects at all , IDE, SATA or Esata or USB.?you do know right,that many laptop users today have CD drive there and it will never fit now in modern thin casesand they buy a external DVD(CD or bluray) drive and plug it in...for that reason and is more easy,look Ma' no screws to fiddle.NO PC TOLD (Aopen what modeL?)NO OS toldand no DVR drive model told.impossible this.?if the drive is internal to PC,laptops just slide in, and connectdesktop, 2 cables, 15pin power, and SATA 7 pin cables (sold in stores even target or walmart)desktop relics that most Aopen are, use IDE (PATA)40- pin ribbon (pata-IDE) and 4 pin molex power (PATA)IDE parts are only sold online, there are 20 year relics. (2001 SATA was . and was wild fire success and is best )