Anvil Kitchen Appliances - Others - Recent Questions, Troubleshooting & Support
Anvil TSA7012
Go to PARTSTOWN.COm and put in the Model number the spring is 7.00.
hope that helps,
Jon
Hello
Should be 2 black and 2 white wires -- each of these wires should be connected to the 2 connections going into the Thermostatic Control Knob. Hope that helps -- IF you still are unsure, then CONTACT ANVIL or VOLLRATH and they will email this to you.
Hope that helps,
Jon
My anvil electric grill not
Could be a couple of things. First check to make sure you have power. Then after checking that open up the bottom with the power unplugged and check the heating element with a OHM meter. Don't know about a OHM meter or Multimeter is, then go on google or YOUTUBE and learn how to use one and if you don't own one, borrow one -- WHile in the OHM meter range check by putting each of the wire leads to each of the heating element ends, IF it registers O.OO, then the problem is NOT the heating element, but could be the thermostatic KNOB CONTROL. IF it is knob thermostat, just order a new one and VOILA! You're back in business!~ Hope that helps,
Jon
Where can i find electric heating element for my
You can get it at PARTSTOWN.COM or you can call GCS (Eco Lab) and they carry is as well -- PART NUMBER for the element is: XFTA0008 (To clarify this is for a ANVIL 36" Griddle with a MODEL NUMBER of FTA8036 230 Volts and 8400 watts.They sell for about 136.00 retail or if you have an account usually about 105.00 Hope this helps,
Jon
Hi,
When I try to use
No the problem is not with the machine, its with the load on the circuit in your home. You have too many high rating items plugged into the same breaker. Try moving the load around to see if that helps. You could also use another outlet to try your sandwich maker on it instead.
If you have any older home, you may not be able to solve this problem without calling an electrican.
What type of power souce
Hi there.
Voltage and ampere or current rating can be verified on unit's nameplate and or Owner's Manual so better check these first before using or connecting the unit to a power source.
Regards.
Pot won't get hot.
Hello ourplace87,
You may want to refer to the Popcorn Maker's Product Manual, which is located at:
http://richmond-va-23215.free-home-warranty.info/household_appliances/household_appliances_warranty/download/pdf_download/PMA7006_z46z_z1z_z1z.pdf
One heating elements works fine.
It means that it gets no power and it is probably either having a loose contact ...or it is dead and need to be replaced..To know that for sure .if you are handy enough ..open it ..power it up ..and use a power measurement tool to see if it receives power at the entry and if there is any when it gets out .....also check the power line at the switches in and out to locate a possible defective one ..Be careful cause this is a high voltage powered device ..
Natural Gas to LP (propane)
Hi,
It would have been great if you would have explained me the issue. Any ways understanding that you have some issues I am posting the entire docuement which would help you to troubleshoot.
www.anvilworld.com/us/DB_images/pdf_240_4.pdf
Please accept the suggestion if it's helpful, you can also get back to us if you have any further query.
Have a nice day.
Not finding what you are looking for?