American Anko Audio Players & Recorders - Recent Questions, Troubleshooting & Support
Wharfedale Mp3 player is locked.If
Hi beatrice mnc...Try this method...
Deleting Files,Pictures,Videos,Audio Books, Apps,etc. from MP3 Player/Ipod
--------------------------------------------------------------------------------------------------------------------------------
BIG WARNING: DO NOT DELETE THE FILES NEEDED TO OPERATE YOUR MP3 PLAYER.
Hook up your mp3 player to your computer
Go to your desktop and double left click on "My Computer"
When it opens you will see listing that says "Devices with Removal Storage" your mp3 player should be listed there.
Right click on your mp3 player, and a window will open, right click on "Open" and now your files/songs should be visible.
Hold the left click down and drag it across all the files/songs that you do not want this will highlight the files/songs you do not want, release,right click and then click on "Delete"
Now you mp3 player should be clear of the files/songs you do not want.
ONE MORE BIG WARNING: BE CAREFUL AND DO NOT DELETE THE FILES NEEDED TO OPERATE YOUR MP3 PLAYER.
This is a FREE answer, Please take time to rate me
Anko mp4 media player
The only solution I have for this problem, is that your mp4 player does not support the type of file you download onto.
Maybe you put mp3 files and your player cannot read them cause its not supported by your player.
Anko directory error when plugging into my computer
Microsoft error management for error 47 says
When the "safely remove hardware" icon is in the status bar (the by time) disconnet the mp3 player. After a few seconds connect it again. Then reboot the computer system. You will then be able to see the contents of the mp3 payer.
I tried and it works. Also it means the player could be removed without clicking on"safely remove hardware".
Lost my USB Connector cord
Every electronis store should have one such as 'The Source'
Or look through your "computer drawer", alot of other things like digital cameras have one.
If you have a specific USB cord you might have to contact American Anko by calling support.
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?