Amana Logo

Amana Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 1K Products
  • 75K Answers
  • 2M Views

go buy a new one

Amana... | 49 views | 0 helpful votes


LOCATE SWITCH UNDER LID AND SEE IF MAGNETS HAVE DISLOCATED IF NOT GO BUY ANEW SWITCH AND REPLACE IT

Amana Washing... | 27 views | 0 helpful votes


SADLY PHYSICAL HELP IS NOT SOMETHING WE CAN DO .DRAINING WOULD BE SOMETHING TO DO WITH THE WATER PUMP THO NOT THE BELT

Amana Washing... | 33 views | 0 helpful votes


Did you have a problem restarting the dryer after each use? It could be a bad motor or open contact in the timer.I would also check the wiring harness and the plug going to the motor. Hope this helps

Amana Dryers | 21 views | 0 helpful votes


You mean ALE643RBW... drew blanks when I first looked and gave up. So... there's no moister sensor for this model. It runs the cycle by the start point of the timer. Its labled "more" dry or "less" dry in some fashion which merely changes the length of the cycle. Simple and dependable but doesn't meet todays "green" requirements.
Most likely it is the timer which lists at ~$170US from Sears. Your dryer has gotta have some years on it so not sure what else it may need in the near future. If you can do repairs yourself, $80 refurb timer on Ebay Otherwise to pay labor and markup... better off with new.

Amana Dryers | 42 views | 0 helpful votes


Error code f6 is an incorrect voltage code. The first thing to do is go to the breaker box and shut the power off to the oven. In some cases there maybe more than 1 breaker controlling the oven, make sure all the power is removed for 5 minutes. After waiting the 5 minutes test the oven if it works all is good, if not you need to gain access to the main board and start checking powers in and out. A lot of the time on a good visual inspection of the wiring and main board you will find the problem due to a melted or burnt spot. I hope this helps.

Amana Ovens | 41 views | 0 helpful votes


MIGHT NEED MOTOR OR A NEW BELT WITHOUT SEEING IT CAN NOT GUESS SORRY

Amana Washing... | 29 views | 0 helpful votes


HOW WOULD WE GUESS . TRY IT AND FIND OUT FOR YOURSELF . THAT IS HOW WE ALL LEARN THINGS

Amana Microwave... | 33 views | 0 helpful votes


Try disconnecting the power to see if it will reset. If that does not fix it, it will probably need a main board, but more testing needs to be done to know for sure.

Amana Kitchen... | 59 views | 0 helpful votes


F1 - Control Board Failure - Replace control board (ERC). F2 - Oven Temperature Too Hot - Replace oven temperature sensor. F3 / F4 - Shorted or Open OvenTemperature Sensor - Replace oven temperature sensor. F5 / F6 / F8 - Control Board Failure - Replace control board.

Amana Heating &... | 59 views | 0 helpful votes


How are you determining that one section.is cold and one warm? If this is in fact the case you have a blockage in the coil or a compressor that is down provided this is a multi compressor unit.

Amana Heating &... | 40 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Amana Experts

Marvin
Marvin

Level 3 Expert

84524 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Cindy Wells

Level 3 Expert

5828 Answers

Are you an Amana Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...