Acer Televison & Video - Recent Questions, Troubleshooting & Support

Refer to page 129 of service manual Acer Aspire 5332, 5732Z - Sevice Guide. www.s-manuals.com.

Help in the link, but you probably need dealer service. https://www.google.com/search?q=Acer+X110P+does+not+light ..

Hi, Please start by switching the outlet that you use to power your projector. If you're not currently plugging the projector into an outlet but using a power strip, you can test that the power strip is still functioning by using it with other items. Thank you.

check the mute button

As Bob Myers mentions, the question can't be answered unless you explain which video output the camera has. The solution for a BNC CCTV camera would not be the same for a PoE IP camera. Provide that information, and we can suggest hardware that would connect your TV sets and project to the camera feed.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Statistical Process Control TrainingAll Acer TV models use the universal Remote Control code NEC 18E7, which most of universal Remote Controls can use. We recommend using the search function, available on most universal remote controls, to find the compatible code for your Acer TV.

go into settings and find "ease of access" or "accessibility" and click on it the option to turn off closed captioning should be in there.

Hi I found a video for you on how, just click on link and it will take you there, All best Clive From N/Wales

The problem with power fluctuations is the Surge Power that exists when Power Is Restored. That passes excessive current to the TV Controller circuit and can blow the circuit board. Sound like that has happened to you. IN THE FUTURE...always use a UPS (Uninterruptable Power Supply) approximately 1000 Watt unit. It has a battery back up feature and filters the line Voltage. It protects the appliances and saves you grief. Walmart has them, Amazon too.

Something is shutting down your power supply

You can use the "RGB" input in the video input menu of the TV. If you don't have that then you can't hook the PC to this TV.

Almost .

Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.