Questions & Answers for: zodiac pool cleaner moving

...zodiac Clings to bottom or sides moving slowly The cleaner clings to bottom of the pool or sides moving and oscillating but moving much slower than normal here is a link to the Technical Support at ...

zodiac g3 doesnt move i have had the g3 for less than a year and it just doesn't move around. What would cause that? Diaphragm ripped. Replace with new one

POOL CLEANER WILL RUN FOR A FEW MINUTES, THEN STOP. SO METIMES IF I SHAKE THE HOSE IT WILL START AGAIN. ANY ANSWERS? Hi , most pool cleaners run by the force of the sucked up water moving gears inside

Zodiac Baracuda Zippy Pool Cleaner only clean one pool side because strong jet don't let move to other side If you don't have directonal eyeballs on your jet's you can get a dirveter for the jet that ...

...zodiac G4 has suction but gets stuck and doesn't move With these pool cleaners, that is often a problem with the flapper. Check the flapper to be sure that no debris is stuck. Debris can halt water ...

zodiac baracuda gets caught up in the corners of my pool constantly. What should I do? If these pool cleaners are getting stuck on corners or other obstacles, try these solutions. Try using Pool Pulse

...Zodiac pool creepy crawly pool cleaner which seems to work for a while, then get stuck in the one spot and not move in our inground pool. With these pool cleaners, getting stuck in one spot is most ...

Zodiac Automatic Pool Cleaner must move randomly throughout the pool and water circulating at the surface will influence the hose and limit coverage. ? To adjust the return inlet: loosen the lock ring

Zodiac G2 Cleaner not moving around pool. Suction is adequate, filter has been backwashed. Cleaner pulled to pieces and reassembled. Has small crack in diaphram. Unit is 6 months old and has problems ...

...pool cleaner only sweeps the deep water zone. It never comes up to the shallow half part of the pool. By the way, the approximate size of my pool is 18 ft x 36 ft. This should be an easy problem to ...