Questions & Answers for: zodiac chlorinator flow light

no flow light on duo clear I turned off the power to the pool pump and duo clear system to clean the filter and when I turned it back on the NO FLOW light is on? check sensor

flow light is on but dim. super chlorinate light is on. Shut off pump. Waited 5 minutes. Turned back on and worked. Add salt light started to flicker and went back to original issue. Tried turning off

no flow light is on and i got lots off flow to pool bad sensor

...Zodiac lm3 24... when the chlorinator cahnges polarity ever 2nd time the no flow light and comes on and the output is a solid orange. Water is flowing around the cell but the chlorine generation has ...

zodiac lm3 24 chlorinator. When it changes polarity every 2nd time the no flow light comes on and the output of chlorine stops ( fixed orange light at output). When the polarity changes again it is ok

...zodiac clearwater chlorinator and last week reliased the water flow green light didn't work and also the meter is not moving only staying on 0. When I turn the chlorinator on the water flows ...

no flow and add salt flashing on my panel, the add salt and no flow light flashed and i have no possibility to select a output (chlore) or super chloronisation check sensor

...zodiac LM3 salt water chlorinator has new board. After reset all good but when starts next cycle the no flow light comes on and no output lights yet the water is circulating perfectly and I cant ...

The no flow light is on ,there is water flowing thru the system the pressure is normal, all the filters are clean we just opened the pool. The temp is 70. check flow sensor

...Zodiac Tri Clorine generator, when i remove the wire to the flow meter it comes on all the time then put it back on and it flashes I have plenty of flow a checked the flow is there and good checked ...