Questions & Answers for: zig zag tension loose

...zig-zag stitch, it now stitches upside down. The zig-zag stitch is actually on the underside of the fabric. HELP Sounds like the needle alignment is out. This website has some instructions on how to ...

...zig zag stitch not working? I changed out my thread and bobbin and when I went to continue my project, the zig zag stitch that I was previously using now doesn't seem to want to work! The machine ...

...zig zag stick and sew a couple of inches. Then examine the stitch. It should look identical on both sides. Look to see which side is drawn too tight, the zig zag being smaller on that side with ...

zig zag stitches on a regular basis. Over the last week, I did a lot of straight stitches. Today when I went to do zig zag again, the top thread is not catching correctly and ends up loose and sort of

...zig zag with loose stitching underneath fabric Straight stitching is fine but missing almost every other stitch on zig-zag leaving a long loose pattern. try changing the needleadjust the top tension ...

zig zag Hiya, Husqvarna Viking Platinum 715. The underthread is loose, no matter what tension, fabric or thread quality. Further more, when asking for a zig zag, the machine throws a different thread.

...zig-zag to allow the fabric and seam to stretch without popping the thread. Test your zig-zag on scrap and pull on the seam to make sure the thread does not break. The more the fabric stretches, the ...

...zig zag the bottom thread is so loose - what is wrong? What is wrong with my model 3610 when doing zig zag the bottom thread is so loose.... the needle thread tension is too loose tighten it up so ...

...zig zag - using two different colored threads to see the stitch- the back of fabric, stitch color is more top thread than bottom, even though the stitch itself looks okay. tension setting is auto but ...

Zig zag not working on Elna Carina seeing machine If the zig zag function on your Elna Carina sewing machine is not working, there could be a few possible causes: Incorrect stitch selector: Make sure ...