Questions & Answers for: zeroing 3 9x40 scope

can't zero scope Mounted scope on a 45-70 barrel. shoots 6" low @ 50 yards. I have the adjustment up as far as it will go. changed mounts thought that was the problem but it wasn't ? lifetime warranty

3-9x40 deerhunter riflescope, have a problem with the windage adjust, cand you send to me, manual for repair or peaces? Go to; www.bsaoptics.com for the manual and parts. You do not say if the WINDAGE

zeroing scope adjustment while zeroing with my tasco scope the windage adjustment is to the max please advise. First, adjust wind-age and elevation to center or zero position. Remove your scope from ...

How do I sight in my Bushnell banner scope? Here is a great site for this issue: http://www.outdoorpros.com/How-To-Guides/How-To-Zero-A-Rifle-Scope/5

my banner scope in 4 to 12 wii not hold zero I'd start by looking at the mounting bases. First tighten the scope ring screws to 25 inch pounds, then loosen and remove the rings from the base(s) while ...

3-9x40 scope rifle how to zero Bushnell 3-9x40 scope on the air gun http://www.bushnell.com/products/scopes/riflescopes/doa-riflescopes/ Go to this link & you will be able to zero it. If you lower

how to zero Bushnell 3-9x40 scope rifle How to zero Bushnell 3-9x40 scope on the air gun this is a good guide: http://www.outdoorpros.com/How-To-Guides/How-To-Zero-A-Rifle-Scope/5

who makes these shooters edge scopes I heard Shooters Edge was made by Bushnell but can't confirm it. For those having problems with their scopes, we have had none. I bought a 3x9x40 and a 10x18x40, ...

zeroing in the scope, had to shim ffront of the scope mount because of no further adjustment!!! I'm now too far right and again no further adjustment on the sites!!! Although the sites and scope block

The control knob for the reticle illumination is very hard to turn (it takes a pliers)! The illumination does work once it is turned to a number other than zero. Is there a way to loosen the control ...