Questions & Answers for: zebra peel off mode

...Mode: Models: Orion (2442, 2443 and 2543), Transport (P-2242), Xport (P-2222), LP/TLP Strata (2684), LP/TLP-2722, 2742, 3742, LP/TLP-2824 ,LP/TLP 2844 and TLP-3842 Turn off printer and have media ...

...a Zebra 105Se, dipswitches??? How do I set the dipswitches so that the printer prints in direct thermal, peel off mode. http://www.thermalimages.com/pages/prd_zebra_printer_ribbons.html try this ...

Zebra 4 Plus pause botton shows a fast blink when using take-up mode. have to push in peel lever to get it to print. Please help Are you sure you are not in peel off mode? It is waiting for a sensor ...

comes on. If you release the pause it will print the second copy of a 10 copy label. This goes on randomly, any thoughts? Sounds like you may have it set for "peel-off" mode instead of "tear-off" mode

...Zebra 2442 would extend the label out so the perforation of the 4x6 label was right at the cutter. When it printed a new label it would backfeed it just a little bit before starting the print. My LP ...

Zebra 90XiII - sometimes when adjusting the tear off position using the arrow keys. The printer (motor) doesn't move the label media in/out. When it does actually move the label media to the desired ...

...of labels peel them off reinsert the wax paper back in the printer turn on printer after 13 in the printer will automatically go into register mode and when you turn it on it will not waste 2 ...