Zebra 105SE My printer prints blank labels, seems like the ink didn't get transfer onto the label. The ribbon is installed correctly and I didn't change anything on the printer. Please help! make sure
...Zebra is on, full of the ink, full of labels, but when we print, the label comes out with nothing on it, Any solutions? bad print head. The solution when I had this problem turned out to be that the ...
Question about S4M00-2001-1100T Thermal Printer
HEAD ELE. BAD ON MY S4M ZEBRA PRINTER Hello, Seems like your Printhead needs to be replaced. I have new 3rd party in stock at this time if needed. Please contact me back. Thanks Rory Cardenas Midrange
...head between each ribbon change. Use the Zebra cleaning tool (looks like a magic marker) or a q-tip with a little bit of denatured alcohol. If this is not the issue make sure there is no wrinkles in ...
Zebra Xi III Hello, My labels are from a coldstore. So the are cold. Is this an option for printing bad. Not black letters but grey. yes .. the print heads can be calibrated to compensate for cold ...
Question about 170XiIIIPlus Thermal Label Printer
...Zebra 170 XILLL PLUS. In the software provided adjust temperature setting of print head before printing the job. Please also check for bad ribbon. Please don't hesitate to ask if any further ...
...head for our Zebra printer and I have install. Now I'm getting this error Error Condition Head Element Bad Thanks Roy F Try putting the original printhead back in and verify the new printhead is not ...
...zebra zm400 prinetr givig me an error message (head element bad) turn printer off, press PAUSE button, turn printer on and wait 5 seconds then release the button. The printer is going to print the ...
...zebra label printers will start to print light because the print head does not get enough power. This is true for the lp2824, gx420d and most other zebra themal printers.
To remedy purchase a ...
Question about LP 2824 Printer
Zebra ZT410 suddenly it gave us an error PH NOT AUTHENTIC / REPLACE PRINT HEAD, INVALID PRINT HEAD It's an original print head and I just changed the media and it gave this error. By the way we have a
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions