...dishwasher but it just hums seems to have washed but not full cicle and ideas chaps cant switch off says ready but hums Aquastop on water inlet tripped. Turn off and slightly undo main inlet hose. ...
Question about 21 in. DCE5655 Free-standing Dishwasher
Zanussi 21 in. DCE5655 Free-standing Dishwasher It fills up with water and all the lights are going off and starts to pump out the water. Durung the draining all controlls including the on/off button ...
water will not fill into dishwasher the dishwasher dosent fill with water,i checked the mains water,its fine,ive checked the hose from the valve to the dishwasher,its fine also,the dishwasher starts ...
wont heat up when put on to wash Try a resolder of the main PCB connections, cured my hot water problems.
Question about 23 in. ZDT6252 Built-in Dishwasher
Zanussi dishwasher wont run a programme After a minute the dishwasher stops running the programme and goes to rinse hold, someone posted here to "reset the computer at the bottom" does anyone know how
Question about 24 in. ZSF6120 Free-standing Dishwasher
...Zanussi Electrolux ZSF6126 and the water is not heating up and it is not drying Check to see if the heat element in the bottom inside is all crusty or cracked, if so replace, if not, unplug unit from ...
Question about 24 in. ZSF6150 Free-standing Dishwasher
...the heating element on my zsf6150s dishwasher because there is no hot water. This has not fixed the problem. What would be the next step? Try resoldering the main PCB connections, it cured my
Question about 24 in. ZSF6150 Free-standing Dishwasher
...zanussi dishwasher ZDF601K trouble shooter says -,antiflood device activated call engineer is there anything I can try ? antiflooddevice bottom of machine it detects water and shuts machine down or ...
...zanussi ZDT6252 - i had to call out a plumber to replace the hose which feeds in the water. Two loads after that the machine has just stopped - no lights and some water left in the bottom of the ...
Question about 23 in. ZDT6252 Built-in Dishwasher
Zanussi Dishwasher DA6152 Blowing Main Fuse When I put my dishwasher on it is blowing my main fuse A guess is that the water has leaked into the motor, and the machine is shorting out. As a retired ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions