the left side of the output is hot and the right the left side of the output is hot and the right side is cold this is at low power output switch cables of the outputs to speaker if the fault transfer
My yahama P3500s Amplifier left channel dead and clipping light stays on both speakers works ok in right channel. Hi, make sure everything is disconnected, is the clip light still on? if so then I'm ...
Question about P3500S Amplifier
...yamaha p3500s power amp won't turn off When I turn my yamaha p3500s power amp on the protection light comes on and won't turn off and won't push no sound. need replaced power output take it to a
...24 pins and are easy to change. Those IC are 25 to 75 for a stereo one like stk4141 etc.since most yamaha amps are dc coupled,when the output transistors go,they take out the driver transistors as ...
...is: Hi i am a technician in nairobi kenya and i have a wide experience in problems relating to yamaha keyaboards and many amplifiers and mixers, i wnat to share this thoughts,ho can i? thank.
ALL THE PARTS ON THE PCB ARE BURNT BIYOND RECOGNETIN Your best solution is to contact Yamaha and see if they still stock the entire board and if they recomend replacement. But I wouldn't hold out ...
distortion sound i have yamaha p3500s and the sound is not clear.the same for ch1 and ch 2.any idea probably crossed ground/ positive connections. if not u have bad channels or a blown reciver
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions