Questions & Answers for: yamaha bear 350 serial

...yamaha big bear 350 cc will shift up but will 1986 yamaha big bear 350 cc 4x4 will shift up but will not shift down. It is now stuck in 6th gear and will not come out of this gear. This also stops it ...

repair manual for a 1999 yamaha big bear yfm350fwb Needing the front yoke for a 1999 big bear 350 yfm350fwb http://www.haynes.com/repairmanuals/yamaha/yfm350fwb%20big%20bear%204x4

...of the starter on a yamaha big bear 350, 1987-1993 model did you locate the battery? now inspect the positive cable... it should lead you there. follow the cable. remove covers for access as ...

Yamaha wolverine 350 4x4 starter won't disengage I have a 2004 yamaha wolverine 350 4x4 and the starter won't disengage. I replaced the one way bearing and all other bearings and washers ...

yamaha 350 big bear my 350 big bear has a loud knock up on the top of the engine does any one know what it could be please help Valve lash. you may just need your valves adjusted.

Why is my 1997 Yamaha big bear 350 not shifting Check the clutch cable. it could be loose.

my 1993 yamaha 350 big bear will not fire to the spark plug turns over good just not getting ignition could be spark plug boot it will screw off and on. could be kill sw bad. or coil bad.

Yamaha big bear 350 4x4 I put new cv axis on both front still make grinding sound If the CV Joints are new and correctly inserted, the most likely culprit for the noise would be the brakes. Remove the

...Yamaha Big Bear 350 2WD. No spark, rebuilt bike has new stator and pick up coil, CDI, coil rectifier, kill switch starter solenoid and relay. I'm still getting no spark to the coil, and bike won't ...