Xerox 8500 displays a message saying "Close front cover to continue" The cover IS closed. Seems like it might be a relay switch? Is there anyway to reset? I've tried turning it off and back on again..
Printer makes a ticking sound and would not print The front and left cover interlock switchs are bad. The spring inside the switches get weak and are marginally making contact. Not good enough contact
xerox 8550 exit cover close error We have checked exit cover and close repeatedly can't get error off. We have un-pluged it and pluged it back in. we can find nothing wrong with the cover?. PLEASE ...
...Xerox Phaser 7400DN. I use to love this printer until now.... My problem is with the "A" door not being open... but the indicator says it is open. Print operation is not available and the red panel ...
xerox phaser 8400 message our printer is stuck! we had to replace the maintenance kit, but it was still printing blurry after that. Our tech support came and tore the machine apart, and now it keeps ...
Question about Phaser 8550DP Printer
...Xerox 8550 Color Printer - Close Exit Cover Red light won't go out keeps saying close exit cover. Exit cover is closed. Turn printer on and off, unplug printer but keeps saying the same thing. Before ...
Question about WorkCentre Pro 416SI All-In-One Laser Printer
...xerox workcenter 416s has the following error: close offset cover. What is this?? There is a small cover where your paper exits into the tray. It probably is just ajar and not actuating the switch. ...
...Xerox image should face the rear of the printer with the chip inserted into the printer first. CAUTION: Do not touch the chip. Slide the Configuration Card into the printer. Connect the power cord ...
Question about WorkCentre Pro 416SI All-In-One Laser Printer
...printer is not printing or scanning and it says close horizontal transport cover. I followed the instructions exactly as it said and it keeps repeating Close Horizontal transport cover If there is ...
Question about WorkCentre Pro 123/128 Printer
...printer it's located on the top left. Make sure it's mounted properly and try to push the button with your finger and see if error goes away, if not replace switch, part number 110E11580. ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions