Questions & Answers for: xa1000 eclipse amp

eclipse XA1000 and protect mode I recently replaced my two 12" subs due to a problem in the voice coils. It seems they were pushed beyond their limits and they broke. These I had installed in parallel

visonik amps turn on into protection mode(where green not red for three days)...switched over the wires to some sony amps and they dont even turn the hell on yeah so the visonik turned on and then ...

l or r speakers will not play when the volume is low speakers are cuting( left, right, front, and back) off when the volume is low or when the system is cold. have changed everything except the amp. ...

shuts off when the volume is turned up over 60 When the volume is turned up over 60 the stereo will stop playing and in order for it to work the car has to be turned off and then turned back on the ...

...HOW MANY WATTS IS MY ECLIPSE AMP. ITS a 32430 premium series 85WX4 ahh..ran across this one not too long ago...4/3/2 channel amp. What you have is a 640watt @ 2 ohm PEAK, 480 RMS, 320watt 2 4 ohm

where does the rem wire plug into It plugs into the power antenna cord on your radio if your radio does not have a dedicated remote cord. The remote switch is so that you amp can detect when your ...

the amp is not turning on but all tests show power to the amp. Ground is ok and power source going to the amp is ok. All fuses are ok. Does the remote wire need to be properly connected for the amp to