Questions & Answers for: working projector wont light

wont power up remotely I tried to turn on my 4805 projector w/remote and nothing happend, batts good, remote led lights on when button pushed. Then manually switched power off and on, @ projector,....

...projector for my squadron i spent $465.00 for a new lamp. it still wont work. i see a green light and hear the fan going. But the lamp wont turn on. I am $3,000.00 in the red this fiscal year. I need ...

...projector remote wont click to next page on Powerpoint presentation i have a dell projector model 1200mp. when i turn the power on the orange light of lamp and temp were just blinked and no output. I ...

projector shuts down after about 3-4 minutes. had been working perfectly for over 2 years. only 200 hours on the bulb. temp&lamp lights aren't lighting, it just dies. seems to be ok after it cools

...projector. It stop working. I assumed the lamp burned out. i purchased a replacement lamp... installed it... to no avail the lamp still wont light. The lamp indicator as well as the power indicator ...

projector and after that it wont work. I just changed the bulb and the message "lamp life is ending wont go away. what can i do about that Unplug your projector from the power source. Hold down the On

...wont reset. the lamp units should be properly aligned with the 2 very tiny switches between them. If not lamp led will blink. If lamp led is continuously on, lamp timer has to be reset, according ...

wont work on either machines.All i get is flashing on/off light,then lamp cover lights up orange on both projectors.Any ideas??cheers Joe... you may have to reset the lamp hour meter to get it to work

...projector in standby mode red light 6 times is a lamp error. either the lamp is old and wont start up or the ballast power pcb is not working. can you hear the sparking of the high voltage trying to ...

...projector. A friend borrowed it and when i got it back it wont work. The indicator lights on top are as follows: the power light blinks green and red while the status light stays red. I checked the ...