wont power up or light up and all cables are correct. I took it all apart and was wondering how to trouble shoot some common electronic issues that may have happpend to the amp. Any suggestions? There
mtx thunder 4004 when powered up light turns on for about 2 seconds then turns off and wont come back on until power is removed then hooked back up. check for shorted output transistors
Question about X Thunder 1000XD Car Amp
...wont power them The light flashing usually means there is a short somewhere. Check your wires to make sure there are no slices and are touching. Also check to make sure you have your remote wire ...
...wont push subs I have an MTX Thunder 81001 with 4 gauge power wire. Everything is wired right and the amp comes on but it is not pushing the subs. Could my power wire be too small? The subs are doing ...
it pounded for 10 seconds then the amp just cut off an it wont power on now. what could this be? how can i fix it? blown fuse?speakers on their way out? check the amp fuses, then the inline power fuse
...wont light I checked and there is power to the remote and power wire and the ground is good there seems to be no broken traces or burnt parts maybe a switching transistor but ??? did u check the fuse ...
Question about Thunder 2-Channel Amplifier 502 Car Audio Amplifier
wont power on. ineed a diagram of inside the unit http://www.retrevo.com/support/MTX-502-Car-Amplifiers-manual/id/23108bh332/t/2/ service manual for troubleshooting www.caraudiohelp.com/newsletter/amp
Question about JackHammer JH600 Car Audio Amplifier
...on the flash sign.. it wont turn on, it give me a flashing light only please run a thicker power and ground if u have already check ur fuse on the power make sure its a big enough amp fuse for the ...
wont power up I have an elite 801d that wont power up. I dont have a cap., i just run from battery to to the amp. The fancy lights flash, but the amp itself wont power up. neither the protect light or
Usually answered in minutes!
Step 2: Please assign your manual to a product: