Questions & Answers for: wiring code

Ad

Random misfire cylinder 1 code check. one spark plug wire #1 differant wire than rest hard one to get to. can't get #1 plug wire tight enough around think it is the wire, have new gas cap reset code ...

Ad

Question about Leviton Decora Sureslide Dimmer 611-6621-i Ivory

1 Answer

electrical box has one red and one black wire and the switch has two balck wires and a green wire. How do I connect them? If I understand correctly, you are replacing a switch that has a black and red

Ad

Question about IMAGERUNNER 6570 Copier

1 Answer

getting a code e004-001 and or e001-001 any ideas? machine was working ok but corona wire broke and replaced wire and now I get these codes. As the machine is warming up these codes pop up. Different ...

Question about 1991 F150

1 Answer

wiring harness goes through the firewall. (See the attached illustration) It is a single pin connector and has a black wire with an orange stripe. To get the codes, ground this wire with a jumper wire

Question about 1991 F150

2 Answers

how do i change my timer Please make sure that the wiring is not tampered and taken out. Purchase the same type of timer and connect the wires after you have a sketch diagram with the wire codes so ...

Question about 1991 F150

2 Answers

...wiring problems, and the code keeps returning with the IAC unplugged, you can check the PCM by removing the IAC wires from the PCM connector (or clipping the wires in a location where they can be ...

...wiring--ho2s code p2249 has the same causes short to ground---ho2s and o2s code p2518 refers to a/c refrigerant pressure sensor B ---circuit high===causes wiring short to positive--a/c refrigerant ...

...yellow wires (in my manual the wire is a yellow) thank you Images for KAM circuit wire color codes Wiring Color Codes : Color Codes - Electronics Textbook www.allaboutcircuits.com > Textbook > Vol.

wiring short to positive ---ECT sensor code p 0122 refers to throttle position (TP) sensor A/ accelerator pedal position (APP) sensor A low input === causes wiring short to ground--TP/APP sensor --ECM

Question about 1994 Ranger Supercab

1 Answer

Wiring harness Frigidaire Refrigerator Error Code = H1 Condition = Freezer sensor shorted in freezer display Repair or Check = Check wiring between thermistor and board. If correct, replace thermistor

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22331 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...