Questions & Answers for: wiring 3 rocker switch light

...3 switch combo rocker Switch will have a commom terminal that the hot wire connects to. The other three terminals are for the devices -- light, fan and other device. The white wires should be the ...

...3 switch for a bath light/fan combo and then onto a vanity light. Basics: wires from ceiling light/fan: black, red, white, ground. Wires to vanity light: black, white, ground. 1755 Switch has common ...

...wiring. I suggest you cut 3 pigtails out of your black wire (about 5-6" each and strip them so you can put a nut to tie them all together on the main wire, then do the same for your grounds using ...

...3 way independent rocker switch with red, black and white wires for 3 lights in bathroom one switch not working can i replace it with a Broan Nutone P66V three function control Leviton triple switch ...

...3 rocker switch that controls a light, fan, heater all in one ceiling unit. The old switch had the white wire in the top switch, one black in the middle and the other black and red in the bottom ...

...wiring switch and Broan; on Broan, red/white wire = heater, black/blue/white = light and vent. Thanks! The switch that you have works like 3 seperate switches. most of these switches will have gold ...

...3-way. So switch has two different rocker-switches on face, and one controls 3-way circuit and one controls single-pole circuit. You are controlling a light and a fan. You have successfully connected ...

...3 Load wires. Note: Neutral wire is NEVER connected to a switch. http://www.frostelectric.com/WOE-IMAGES/00381764.jpg 7) Since I cannot see wiring project or know what loads or how the testing comes ...

...3 rocker switch hoping to have separate switches for each light but I am not sure if this is possible and if it is what goes where. I will try to attach a picture but here is an explanation of ...

...3 rocker/4 function switch to a fan with fan/heat/light/night lt. There are 3 colored wires out of the back red,black,blue and 2 load screws. If the two load screws are connected with a tab that is ...