Questions & Answers for: wire rca to hdmi

...rca 2 audio 1 video, so if you want the best picture and sound use the HDMI, next step down is Component, 5 wires, 1red ,1blue, and one green, just for the video, then the right and left audio. Or an ...

...Plug the 2 RCA jacks from the wire you bought into the TV in the corresponding inputs that go with the input you plugged the image in, and the 1/8 stereo jack into the headphone output of your

...hdmi to rca wires from laptop to tv....not getting any pic or sound on tv?? Are you sure you have identified properly the connectors ? I have never seen such cable : HDMI to RCA. HDMI is digital ...

and all i get is picture static Try another Hdmi wire. Try another Hdmi source. Try another Hdmi port. If all else fails, replace the board with the Hdmi port on the tv.(I forgot the name of the board

...wire if i have a cable box ? It depens on what the cable box outputs are, you need to see if it has RF Coaxial jack (use CH3 or CH 4 on the TV), composite video out (Yellow RCA jack) with red and ...

...the DVD player? You will also need to setup the HDMI sound set up to send the sound through the HDMI cable or through the audio analog RCA ports. More info needed. Hook up per DVD and TV user ...

...wire Look to see if there is an audio out with RCA connectors on the TV. You can't recover audio from the HDMI cable directly. It's impossible because the audio has to be taken from the HDMI signal ...

RCA cables coming from the cable box (Audio out - white wire I'd figure) going into a stereo near the monitor that has a VIDEO button on it where the white RCA cable is plugged into the Audio In jack.

...and powered it up and the tv shut off any time HDMI or any component plugged in the TV shuts off its an RCA LED 55 board is failing. try unplug the power wire let stand for 15 minutes. plug back ...

the player up using soley RCA connections and do not use hdmi wire. The hdmi wire carries both audio and video signal. You cannot use two combined unless your player is hardwired to split both signals