Questions & Answers for: wire harness manufacturer

...will work because the color codes are usually different from what we use in the states. i would go and get the right wire harness to prevent and shorts from happening..........please rate ...

is to use a vehicle specific wiring harness that plug into the vehicle harness. You just splice the wires from your receiver harness to the vehicle specific harness, matching function for function and

...manufacturer supplied plug which most installers pair up with a vehicle specific wiring harness. There are some dealers that will mate the 2 for you providing a plug in solution. One in particular, ...

...harness going from the controller board to the power button (4 grey, 1 blue wire) and from the power button to the side controls (3 grey, 1 blue wire). The insulation was not stripped properly from ...

...wiring harness were pulled out or cut. I need a diagram for how to fix. Contact the Manufacturer, Via Internet.   Most times they have FREE downloads for wireing problems to their

...for backed out terminals, improper mating, broken locks, improperly formed or damaged terminals, and poor terminal to wire connection. Inspect the wiring harness for damage.Hope this

...wire There is a cord hanging down near the front of the car, almost under the front light area. It appears to have some kind of "plug" at the end. However, I don't know if it's suppose to be ...

...manufacturer's harness. It is important to make sure that you purchase a wiring harness that is compatible with the Boss BV9967B and the specific vehicle in which it will be installed. Make sure to ...

...got into wiring chewed threw all wires. I need all knew wires. You could contact Harbour Freight directly or you could use a specialist harness manufacturer who could use the old one as a