Questions & Answers for: Samsung HL wire a ballast

...ballast to power lamp? try to look for burnt components of the tv and look for a repairman to do the job for you. it maybe the lamp is the problem. Start by cleaning and checking the fans. When the ...

...ballast tombstones. There will be either one or two wires going to each tombstone fixture. Regardless of the number of wires, the colors will be the following: Blue or yellow are the power wires and ...

...necessarily blown. If it looks good, try tightening the connections inside the assembly, the two wires (be careful fragile, glass, mercury,

...on the right side of the engine and on top of the Lamp Housing. You will see two RED High Voltage wires coming out of one end. Don't worry, there is no stored voltage in the ballast so you won't

wire going to the ballast a switch that turns it on and off? If so, what is the part on the other end of that wire. Jeff M. [email protected] I am not going down without a fight with this TV!

...from the fan. It happens after the tv is on for a few minutes...what is going on???? I found the ballast HV wire going to lamp was burning on this one. For the loud hum it could be the color

If it's the color wheel, we may just buy a new t.v. Thanks The ballast board controls the lamp. The wires from the bulb attach to the ballast board. That board is your problem

...wire. If your tv turns on then that is your problem. Its cheap too. Here were my symptoms..1] Turn tv on 2] Bulb would light up..(which eliminates the ballast) regular picture would show up (which ...

...wire. If your tv turns on then that is your problem. Its cheap too. Here were my symptoms..1] Turn tv on 2] Bulb would light up..(which eliminates the ballast) regular picture would show up (which ...

...Google the model number with "ballast" to id part number and see a photo----it will have two wires either red or black that go to the plug for the lamp----quite likely the You Tube will have ...