Question about U6630-900 WindTunnel Bagless Upright Vacuum
...Wind Tunnel bagless- issue with turning on I have a brand new hoover wind tunnel. while in the middle of vacuming it just turned off and now won't turn on agian. Ideas Have you tried to plug the ...
...wind tunnel turbopower 7000 (canister vacuum) turned off automatically during use and won't turn back on. try using a couple of different outlets .move the cord around at both ends you might have a ...
...Wind Tunnel does not turn on We have a Hoover Wind Tunnel Mach 4.7 that is 8-9 years old. It will not turn on. We have not had any previous problems. Is there a reset button or is the motor just bad? ...
Wind Tunnel vacuum motor won't turn on The motor on my Wind Tunnel vacuum simply "turned off" while I was using it yesterday. I thought it had come unplugged, but that wasn't the case. I wiggled the ...
Question about Company Wind Tunnel U53019 Upright Vacuum
...wind tunnel belts? How do you change the Hoover wind tunnel vacuum cleaner belts? If you turn the vacuum over there will be (4) screws that hold on the base cover for the roller brush. Remove the ...
Question about Company Wind Tunnel U53019 Upright Vacuum
...Wind Tunnel vacuum cleaner runs for a minute or two then turns off. (It does not respond to the on-off switch on the handle.) It will start again after a few minutes. The side filter has been removed ...
Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
...Wind Tunnel Self-propelled vacuum. I changed the belts because the brush was not turning. After replacing the belts the brush is still not turning what can be wrong? there are two belts on the wind ...
Question about U8126-900 Wind Tunnel Dual V Bagless Upright Vacuum
...wind tunnel vacuum turn on First of all you have checked to make sure you are plugging into a outlet that has power correct ? If you have power at the outlet then when you activate the switch does it ...
Question about Self-Propelled WindTunnel Bagless Upright VacuumVacuum
...wind tunnel just quit while vacuuming. It is dead??? Two years old used about every other week? Any suggestions? Some Wind Tunnels by Hoover have a poor design in the switch on the handle. Sometimes ...
Question about U8126-900 Wind Tunnel Dual V Bagless Upright Vacuum
wind tunnel vacum. And how to replace it. My brushes are not spinning. Why aren't the brushes on vacum are not spinning around? Its usually located underneath the body of the unit, turn it upside down
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions
