Questions & Answers for: wind strimmer

how to thread a strimmer Black and Decker the spool itself had a direction how to wind the string.

...strimmer line to bump feed from my RYOBI Srimmer. This is the first replacement and i'm obviously doing something wrong when wrapping it onto the spool....any help greatly appreciated... rotate the ...

...strimmer wire keps coming out in excess ; i have a ryobi th34 . When I start stimming my wire just keeps coming out of the head You have the string wound the wrong way on the spool. Wind clockwise ...

WINDING NYLON CORD ON TO EIT250 STRIMMER HASQUVANA the spool usually has an arrow on it showing you the direction

How do I restring my strimmer? Model no.GL575C How do I restring my strimmer? Model no.GL575C turn trimmer upside down and pull spoolhead off wind new string clockwise

...strimmer. I wind replacement cord onto the spool as per manufacturer's instructions. After about 20 seconds, the cord breaks (inside the spool) and needs to be reset. I often use the strimmer turned ...

strimmer line to a McCuloch Cabrio 310? Everytime I reload it the line feeds out automatically! Try winding it the opposite direction. Make sure string is tight when winding. I usually keep one finger

...strimmer. i recently replaced the line on the spool but now it wont feed, ?? Remove cup from bottom of unit by depressing 2 detent tabs and pulling away from unit. Replace empty spool with new full ...

...strimmer, how do I wind the line so I stop losing the line You are winding the line on the spool in the wrong direction. The line should be wound on in the opposite direction of the way that the head ...

...on strimmer, and without the wire touching anything it pops out long again.? Ian your'e either not winding it the right way or your not getting the head to click in properly. Try winding the cord