Questions & Answers for: white teeth Sewing Machines

how do i get the teeth to come up to move the material i am unable to have the teeth to come up to move the material how do i do that? where do i all oil it too and how can i get it to go as fast as ...

...white button on the lower right front of the machine is the button that drops the feed teeth. If it is pressed in the feed teeth are down, push in a lift upward to be sure it's in the "Up" position. ...

how do you drop the feeder teeth? There is a feed cover plate that comes with the machine. I fyou need a replacement, good luck, I'm still searching for one.

teeth do not move material forward when sewing I'm having an issue w/my daughter-in-laws sewing machine. It will operate but the teeth do not move the material - so it sews over and over in the same ...

There is a knob on the left side of machine, I don't know what it does or used for. The manual didn't make it to me with the machine. I figured out the threading, but the tension is too tight. I would

...teeth marks, floor protector spike hole or pests). Take your connections apart and make sure the don't have carbon coatings (like black from a short). Next, check the connections are together fully ...

White 2037 sewing machine and it works but the feed teeth lever is broken. I can't lower and raise the feed teeth. Any suggestions? It must be replaced; meanwhile you can use a flat wood stick to lift

...help the feed dogs on my brother LS 1217 has dropped I have taken the back off and the white bar with the teeth is in tact What else can I do perhaps this will help: Brother LS1217 feed dog ...

...teeth are and they crack. It's a real design weakness. you can find replacements online easily for example: https://millardsewing.com/product/looper-timing-gear-for-white-sergers-503-504-523-534/ but ...