...white plastic rocker switch which is very poorly attached to the micro switch at the back of the unit has become dislodged which means the micro switch is permanently open. Unfortunately due to its ...
white film strip stuck to the flatbed glass was slightly crooked, it doesn't take much!) Dirty slide bar (clean & oil); Bad stepper motor, bad scanner PCBA (replace). I'm on my second printer, and
...you watch inside look for esposure lamp continuity and terminals,thermal fuse,mirrors displaced,home sensor and white strip in cover glass, and u wanna may check supply power pack,this are the ...
Question about DeskJet 930cm InkJet Printer
white plastic strip behind the ink cartridges is folded over and the ink cartridges sit about 1/3 of the way from the far right where they should go when lid is down. I am assuming something BROKE but
...white page. You should see that the faded out section is gone or diminished in size. If it is not gone, simply repeat the above steps until it is gone. You will see that the faded out strip gets ...
...white pieces underneath the roller that moves the belt that moves the carriage. Well the inside of the rollers is stripped. Any way to get new parts for it? I called a place and they said I need to ...
...white tape, the other layers bunch up inside the machine. Called Brother, and they were no help (indeed not much interested in my problem), except to suggest I clean the rollers with alcohol/q-tip. ...
...called the "Drum" and it is light sensitive and very easily scratched so be careful with it and avoid touching the blue surface if possible). Rotate the white plastic gears at the ends of the drum ...
...called the "Drum" and it is light sensitive and very easily scratched so be careful with it and avoid touching the blue surface if possible). Rotate the white plastic gears at the ends of the drum ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions