Questions & Answers for: white sewing machine clutch

...sewing machine oil. Too much will later lead to the problem recurring. Now your projector should be cycling fine, though you might have to turn it right side up to judge accurately. If so, turn it ...

sewing machine is on, but nothing happens when the foot control is pressed I've just fixed this problem by replacingthe main capacitor in the foot pedal. I have a Bernina 830. I needed a soldering

...sewing machine. When sewing the needle will stop in the down position and then the hand wheel starts spinning freely without moving the needle. If I hold on to the inner wheel and turn the outer hand ...

...white, thick gear that gets driven by a long worm gear/pulley that is driven by the motor belt. Above the thick gear is a silver-grey metal catch or "trigger" and resting on - or near it- will be a ...

white worm gear in the heart of the mechanism. Above it will be an L-shaped metal finger. (Again you MAY need to manually turn the mechanism via the fan) The finger normally sets against a metal catch

White Sewing Center for spares and repairs.  But I would strongly suggest that you jump over to Yahoo groups and join the group called "Elna heirlooms", then search the threads there as there has

...White 1099 sewing machine. Several years ago, I interrupted a project to fill a bobbin. After I filled it and re-tightened the handwheel, neither the handwheel nor the needle moved when I pressed on ...

...white sewing machine oil inside the barrel and rotate the handwheel. As you are rotating slowly push the handwheel back onto the shaft. At this point, it can be helpful to run the machine to ...

...sewing machine (ie 930 Record, 830 Record, 730 Record, 530 Record), it is likely one of two problems. One: a white plastic gear (there are two) is cracked or broken which involves a trip to your ...