...white stripe running vertical on the paper. It is not is the same spot everytime. Any suggestions? Maje sure tyhat the corona wire is clean (use a dry bristle haired artists paint brush or use the ...
...that goes thru the middle that is white. take out the drum and look carefully is there any foreign object on it, what about the toner? hair etc... is there a cleaner for the primary? is it in
...white Vertical is most likely from the developper (unit that has the toner and is against the drum, look at the roller it should be solid black, maybe there is something on it : hair paper
Question about LaserJet 3050 All-In-One Printer
...white-out. thanks, DSW Make sure that the corona wire is clean (use a dry bristle haired artists paint brush or use the cleaning pad supplied with the printer) and making sure that the toner cart ...
...white streaks appearing page after page which renders my work useless, and a complete waste of ink. Make sure that the corona wire is clean (use a dry bristle haired artists paint brush or use the ...
...toner cart in) and cleaned the heating roller. I tried printing and in the middle of the print I opened the cover. The white line happens while the paper is coming out of the drum before it hits the ...
...hair as close to snow white/ paper white as poss..can i mix T18 white lady with a 40 vol peroxide devloper? What color will the fin product be? Or should i just mix T18 in with my powder and peroxide ...
i used the wrong ratio should have used 2 to 1 but used 1-1 originally white hair is now reddish brown used 7wg7/73 how soon can i recolor usually wait one week and you should be fine.
Question about Color Charm Toner #T27
...(hard to match and quite damaging, use a tone colorant which is a few shades lighter to color the white hair only (looks natural If done properly) while your hair is in that stage. Or shave your
Question about Color Charm Toner #T27
...white stripe is going trough only one color, inspect the cartridge with that color. It has to have the same stripe on the developing roller. See if there is some dust beneath it that makes the stripe ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions