Questions & Answers for: whistling sound applying brakes

...whistling" I hear when I brake is not a faint or subtle sound, I find their explanation hard to believe and totally unacceptable. I have an appointment to have the brakes looked at again. Thank you, ...

Whistling sound coming from the rear when car is in motion. It is driving me crazy. Please provide solution:-) If the whistling changes when applying brakes it is just your warning indicator letting ...

when i applied the brakes ,it whistle.What can be the problem sounds like brake wear indicator, time for brakes if so If it is more like a "squeal" then the front brake pads are wearing out. If it is ...

whistling sound while applying brakes. I am driving a 2006 Malubu 2.2liter, 4 dr sedan 60K miles and it began a whistling sound when I apply brakes. Is it a sign of brake wear? Something else? When I ...

...apply by brakes i can still hear a whistleing sound. What could be the problem Did you turn your rotors???? sounds may be the pads are glazed. Remove the pads and scuff them up with coarse sand

...whistling sound. When I apply the brakes it stops. I take my foot off the brake, it starts. It gets quite loud. It doesn't matter if it's highway driving It may be your brake vacuum assisted ...

Have HZJ75 Trayback 1997 with a loud whistling noise coming from front driver side when vehicle takes off. Lasts about 5-6 seconds of driving and then disappears. possible that either your brake ...

sound when i hit the brakes. it has since stopped whistling and started grinding when driving and the popping when applying brakes is still happenig. could it be the rotor? Possibly the brake pads are

...whistling sound coming from my tire is that my brakes or could it b something else? No brand, year and model of car identified which would help. 1. If it only occurs when you apply the brakes then it ...

...whistling' sound (as can a worn CV joint). A grinding noise with brakes is either worn pads causing metal to metal contact on the brake disk/rotor, or the brake backing plate catching on a spinning ...