Questions & Answers for: whirlpool washer balance sensor

spin cycle If I have one to two items in the machine on drain/spin or rinse/spin my clothes always come out sopping wet. Other cycles seem to be fine. I've had my machine for about 3 years. the ...

...and wont stop whirlpool ultimate care II, overflows with water does not shut off Bad Preasure valve comes to mind first and formost it acts like a level sensor balanceing the size indicated for

will not spin These front loaders are have sensores for load balance.. If th load is uneven at the time of spin - it will not spin.. Try it with nothing in it.. If it spins - that was the issue.. Good

Whirlpool front load washer won't spin - just sometimes My washer usually doesn;t spin fast enough, but only if we're washing our king size bed sheets. Then, if we put them back in for the "Drain/Spin

After washer runs for a few minutes it stops and runs agains, stops and runs again with stop and start intervals getting shorter and never finishes cycle. Seems it's unable to spin continuously. there

whirlpool 6th sense front load washing machine stopping mid cycle. Have to turn power off to reset & restart I have the same problem. Stops randomly during the cycle and turning off the power for ...

whirlpool duet wfw9550 keeps getting out of balance on spin cycle i have re-leveled the washer 4 times now and it keeps going crazy on spin cycle how do i fix Their is a auto balance circuit in the ...

...washer keeps stopping at the spin cycle and says UL for uneven load. The load is not uneven and evey load does this Hi. UL is displayed when there is a balancing problem or when balancing sensor is ...

...balance. What can I do to fix this problem ? Shows code ul in display screen. Hello, if you have tryed unplugging the washer from the 110v plug and let set for 30 mins, if that doesn't work you have ...

...washer wont spin at all ,,it does everything else ,,but wont spin,it did shake off balance when it did spin,,need to find out what part i need to buy, its a whirlpool . i replaced lid switch, still ...