Questions & Answers for: whirlpool range flame oven

Question about GS445LELS Gas Kitchen Range

2 Answers

Whirlpool oven won't ignite Our gas range will not ignite. The oven had been cooking for 90 min and the flame seemed to go out about 10 min before time. After that, the oven would not start again. The

Ad

...Whirlpool Range from NAT to LP The range is a Super capacity 465. Model # SF367LEKQ2. I replaced the the burner with Kit #3196473?Sealed Burner Models. For some reason I had to do nothing to the ...

Ad

Question about GS460 Gas Kitchen Range

1 Answer

Whirlpool gas oven-Super Capacity 465 New ignitor installed because oven would not light. Now gas oven (propane) flame won't shut off. Had to turn propane off at the tank. Oven flames kept burning ...

...Whirlpool Super Capacity 465 gas Range and Oven. The top stove burners work fine the broiler works fine. When I turn on the oven, the ignitor goes on, lights a flame that only stays lit for 2 or 3 ...

Question about GS460 Gas Kitchen Range

1 Answer

...whirlpool super capacity 465 and when we turn the oven on, the flames come up into the oven compartment. how do i adjust the flames. If the burner pressure is adjustable(some are not) you can use a ...

Question about Accubake SF362LXTS Kitchen Range

1 Answer

oven flame is yellow and orange. you can smell My oven flame is yellow and orange. And you can smell gas during the preheating process. It take a tremendous amount of time to reach usable temperature.

Question about GS563LXSS - stainless Steel Gas Kitchen Range

2 Answers

...Whirlpool GS563LXSS: Oven doesn't work. Cooktop works fine. Oven suddenly stopped to work. After trying to turn on "bake" or "broil" I can hear couple clicks but nothing else happens. No flame/no gas ...

Question about GS460 Gas Kitchen Range

1 Answer

...whirlpool super capacity 465 and when we turn the oven on, the flames come up into the oven compartment. how do i adjust the flames. It doesn't have a screw or nut to adjust It does have a conversion ...

whirlpool sf362lxt oven sets off carbon monoxide detector randomly yet all flames are blue so the tenant was baking and after about ten min. past the preheat cycle the co detector went off , tenant ...

i spilled a lot of bacon grease in my accubake oven when i turned the self cleaner on it flamed what should i do when i start self cleaning the oven & i see flames? Wipe out the oven with paper towels

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...