...whirlpool gold just 5 burner top all ignitors lite thats the way the stove works thats a safty feature..but im thinking your question is they wont go off,,if thats the case replace spark module...if ...
whirlpool gas oven sf302 We have a whirlpool gas oven model sf3020ekq4. The stove top burners ignite and work, but the oven will not heat. We turn the temperature knob to start it, and it does not ...
Whirlpool gas range spark ignition problem. This is one of the newer models, bought in 2008. The gas works fine, as the gas shoots out of its respective stove. It's just that only the front-left ...
whirlpool gas oven sf315pemb1- oven not heating We have a whirlpool gas oven model sf3020ekq4. The stove top burners ignite and work, but the oven will not heat. We turn the temperature knob to start ...
...are to low? I have a whirlpool model SF379LEKS stove and I need to know how i can adjust the bunner flame higher? take the knob off, insert a small flat head screwdriver into the shaft and turn ...
Question about SF367 Gas Kitchen Range
Whirlpool gas stove burners are too high on low The flame on my Whirlpool gas stove burners are too high and I'm not able to simmer anything on low. Everything overflows. either turn down the gas knob
...whirlpool model sf375pee gas stove. Only the right rear burner will light when I turn the knob to light. The rest of the burners have to be lit with a match. I replaced the spark igniter and the ...
whirlpool gas stove and all of a sudden I cannot turn on the oven. The knob is permanently pressed down now (didn't used to be) but I cannot turn it. Have removed knob to try to turn the c--shaped
Question about WFG231LVB Freestanding Gas Range with 4 Semi-Sealed Burners
...gas stove top . burners want turn down to low. Only medium and high flame work on burners. Has this just recently happened? Check the knobs aren't cracked sometimes the brass spindle inside the knob ...
Question about WFG231LVB Freestanding Gas Range with 4 Semi-Sealed Burners
Whirlpool gas stove burner knob is loose the far right knob got bumped into and now the knob is wiggling loose You should be able to pull the knob straight out. Don't lose the internal sleeve. Here is
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions