...basket are all one assembly. Can the spider arms be replaced? I could not find a sears part number for the shaft or spider arms. If this is all one assembly, I would think Sears would be responsible ...
spider on the inner basket (drum bracket) has broken which is causing it to be loose and rubbing on the inside of the outer tub. This can be verified by checking for excessive play of the inner basket
Question about Duet GHW9150P Front Load Washer
...the aluminum spider to be rotted. The basket was dragging and that made the motor overload. I made up a stainless steel plate, took the original shaft and pressed it in. Re-assembled and now is ...
...whirlpool duet spider arm You are referring to the spin basket. The spider arms (there are three of them) are welded to the back of the basket as supports. You cannot purchase them separately as they ...
...basket which is covered by at least a 10-year warranty. The most frustrating fact is that the spinner support is not covered by the same warranty even though they come as an assembly which costs at ...
Question about GHW9150 Duet Washer
...thus still under warranty, Whirlpool sent the replacement basket and outer tub half, complete with gasket, free of charge. The above procedure was indispensable for a DIY job. Thank you blue
Question about Duet GHW9150P Front Load Washer
basket to the spindle. It is an extensive repair. You would likely need to nearly disassemble the entire machine. It is do-able and rewarding.The good news is the part is covered for
...basket at 9 and 3 o'clock and see if you can move it sideways,then again at 6 and 12 o'clock and move it up and down,if you can do this,then the drum spider trunnion is broken in behind the ...
Question about GHW9400 Duet Washer
Whirlpool front load Duet washer Model WFW9550ww00. Basket unstable, especially during rinse and spin cycles. You tube videos tell me that the bearing and spider arm may be the culprit. The bearing ...
Question about GHW9400 Duet Washer
Whirlpool front load Duet washer Model WFW9550ww00. Basket unstable & bangs loudly during spin. You tube videos tell me that the bearing and spider arm may be the culprit. Any way to DIY? support arms
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions