Questions & Answers for: wheelwriter 3 ribbon wont lift

wheelwriter 6 keys strike paper but don't hit ribbon, ribbon doesn't rise up, no black letter on paper You may need a ribbon motor or motor board, however on the older wheelwriters sometimes the gear ...

wheelwriter ribbons Does the wheelwriter 3 and wheelwriter 5 use the same ribbon The entire Wheelwriter line use the same supplies, ribbons and lift off tapes. DickyO

...ribbon I assume this is a wheelwriter. If so push the blue lever on the rt. side of the ribbon to the rear and lift the ribbon and lift off out of the machine, seperate the ribbon and L/O. Attach L/O ...

wheelwriter 3 not printing now just changed the ribbon & correction cartridge, but now it won't print help! If the ribbon is lifting up you probably have a cracked print solenoid plunger cap. They are

...wheelwriter 3, but the correction doesnt wk i type and it works but the correction part doesnt work, i changed the correction tape and same thing...any suggestions Does it do the things to correct? ...

...wheelwriter 3 and it doesn't seem to be lifting the error. Any advise? The correction tape is not old and I had already tried moving it a couple of inches but it still is not working. You may have a ...

...Wheelwriter 6 - Ribbon doesn't lift high enough for the key that's pressed to print on paper. Ribbon advances OK. IBM Wheelwriter 6 - Ribbon doesn't lift high enough for the key ...

...Wheelwriter 3 - Cannot get the complete word - Middle part of word is white Hi Hope someone can help me to solve this problem; My IBM Wheelwriter 3 cannot get the complete word when I type; Top part ...

wheelwriter 2 correction ribbon lift adjustment nost high enough won't correct tops of tall letters. l, 1, T etc. Not enough lift adjustment Check that the lift off is properly attached to the

Wheelwriter 2, the bottom half of the letters are not printing. It is not the ribbon because I have changed it out. Two things come to mind for this problem. First try pushing down firmly on both ends