Torque Setting for the Wheel Berring Nut Need to know the Torque setting for the Wheel Berring Is this a 4x4 or 2 wheel drive?If its 4x4 its 150flbs and 2 wheel drive its tightened by hand until slop ...
Question about 2006 HP2 Enduro
...wheel bolts M10x53x1,25 = 60NM Brake caliper to fork torque needed if changing to SM wheels. Method. Torque greased axle bolt to 50NM, then compress forks several times without using brakes, then ...
...torque on a wheel bearing what to set the torque on a front wheel bearing of a 2006 chevy trailblazer 103 lb feet Simple torque for all wheelbearing's is tighten until the wheel wont turn loosen ...
...to: 106 inch. lbs. (12 Nm) Rotor (See: Disc Brake Rotor Tire and wheel assembly Wheel lug nut tightening sequence Torque the lug nuts to specification Test drive the vehicle to confirm the ...
do you tork rotors Yes, it is very important that you torque the wheels on your car. The correct torque for your model is 80 ft-pds. After driving 50 miles you need to re- torque to 80 ft-pds . That ...
...torque setings for the wheel nuts for same moter Tighten the U-bolt nuts evenly in a cross-type pattern with the weight of the vehicle on it's wheels (not jacked up it means) Tighten the U-bolts ...
Question about 1995-1997 Chevy 3500 Truck Ignition Starter Alarm Switch
...the spec There should be very little to the front wheel brngs. Tighten them with a little torque, spin the wheel and tighten with a little tightness then back off until you have no play in the
Question about 1995-1997 Chevy 3500 Truck Ignition Starter Alarm Switch
nuts? 2001 GMC Truck Sierra 1500 4WD 5.3L SFI 8cyl The Lug Nut Tightening Torque 140 Foot pounds (Final torque). Install the wheel nuts. Tighten Tighten the wheel nuts as shown to 190 N?·m (140 lb ft)
Question about 1995-1997 Chevy 3500 Truck Ignition Starter Alarm Switch
...Torque wheel speed sensor to knuckle to 133 in. lbs. e. Torque stabilizer bar upper link to 111 ft. lbs. f. Torque previously removed hub nut to 258 ft. lbs; to seat halfshaft. g. Torque new hub nut ...
Question about 1995-1997 Chevy 3500 Truck Ignition Starter Alarm Switch
...tightening torque value for the rear wheel nut of Mio soul i 125. There is no info for that in the motorcycle's manual Thanks in advance The tightening torque value for the rear wheel nut of a Yamaha ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions