Wedge connection. But now I'm facing a problem whereby the keyboard does not work once the scanner is connected. What could cause this problem? What I suspect is the Y-cable with the keyboard emulator
...Keyboard Wedge Barcode Scanner (MS5145) We recently implemented barcode scanning. About 30% of the scanners do not work. They lock-up the keyboard and often the computer will not boot. The light on ...
...laptop? There are 3 little clips that will push back at the top end of the keyboard, you need to wedge a small pin or screwdriver into the edge of the keyboard and push each one asy you work
...keyboard Wedge only works with PC keyboard connected we have a LS2208 PS2 keybaord wedge I/f, but we have to connect the PC keyboard to it to allow this to work how can this be avoided one of the ...
Keyboard does not I have a LS2208 wedge connected through PS2 connection to the back of a PC running Windows XP. The scanner works fine but the keyboard is not recognized by the PC at all, even though
...keyboard wedge cable, you will need to scan the keyboard wedge barcode from the manual. Page 20. ...
...Keyboard Wedge Barcode Scanners are sometimes tricky because they will not operate if the keyboard is physically attached to the Scanners' "Y" cable. A possible solution would be to attach an ...
Question about IDTECH Barcode Scanners IDT4431-4-2 (IDT443142)
have an idtech econoscan keyboard wedge ccd scanner locks up keyboard on linux based system works fine on windows and dos based systems any ideas wine is the universal windows utility in Linux
...keyboard wedge, you scan the barcodes that come in the user guide to set it up, its pretty much a plug and play. you can find the quick start guide at ...
...KEYBOARD WEDGE BARCODE BUT STILL DOES NOT WORK EVEN IN WORD PAD Maybe you have to configure it to select the connection you are using (keyboard wedge). Please check the user's guide for ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
