Questions & Answers for: weber carb problems

Question about 1986 Wagon Camper

1 Answer

...carb investigation and renewal of the heater unit, I decided to replace the Pierburg with a Weber. I have fitted the weber and have the same problem. Turning the enrichment screw is having no effect. ...

Ad

Question about 1987 Pickup

1 Answer

carb out for a Weber set-up for this application. I know cost of this is cheaper than a new OEM carb. Is this a good option, or is the original carb. worth keeping. If so, what in the carb. is causing

Ad

...weber carb. What sort and specification should the valve be? You are being told wrong. Low speed problems may be do to flot level set to high. Do you have only low speed issues? If mid range and high ...

Question about 1987 Pickup

1 Answer

weber carb problems i have71 toyota corolla station wagon with headers 1.6 engine with dual weber. that was stored for 4yrs. clean carb and replaced gas still wont idle in low and backsfire. need to ...

Question about 1987 Pickup

1 Answer

...professional rebuilt carb. 2lb. fuel pressure. Could this be a vacuum leak? you stated you had have had the carbs rebuilt but it still sounds like a carb problem. Are they originals or a

...weber tunning pages, why not google that. in the old days, we'd use spark plug readings for full week end (wasted ) to tune any custom carb,, fast forward, 21st century, we have nice wide bad 0xy ...

...Weber-34DGEC-CARB-Conversion-Probs 1: is fuel pressure. 2: is float level checks. 3: is jetting, 4: is no intake leaks, or it will never idle right or stalls. or races. if its rich (wrong jets) it ...

...weber carb i installed,call me if you like.Click here to see. 85 Nissan 720 4x4 2 4 Weber conversion Here's another to see. 85 Nissan 720 4x4 Silverbullet 4 with Samantha YORKIE at the wheel look ...

...kit which replaced carb and vaccume lines,but I would put a weber carb on it they have a great kit 32/36 dgv progressive two barrel carb runs much better oringinal carb had problems from

Weber carb on a Suzuki samurai. Runs ok but continues to try to run after turning off this is caused by mixture getting past the idle and being sucked into the combustion chambers and being ignited by

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...