Questions & Answers for: Pontiac Grand Am water pump housing

Ad

...water pump feed pipe bolts. Remove the thermostat housing to water pump feed pipe. Fig. Thermostat mounting-2.2L engine Remove the thermostat.Check the seal. For other engines (3.1L and 3.4L) visit ...

Ad

Question about 1994 Grand Am

1 Answer

...WATER PUMP IS LOCATED on a 2.3 liter 4 cylinder quad hoc it is driven off the timing chain, here is how you replace it 2.3L And 2.4L OHC Engines Disconnect the oxygen sensor harness connector Raise ...

Ad

Question about 1994 Grand Am

1 Answer

...water pump and replacing it with a new one How to Replace the Water Pump in a Pontiac Grand Am The water pump is the heart of the Pontiac grand am's cooling system, circulating the coolant. A faulty ...

Question about 1999 Grand Am GT

2 Answers

water pump how do i change the water pump and how hard is it NOT HARD BUT YOU HAVE TO DRAIN COOLANT OUT OF SYSTEM.CATCHING IT IN A DRAIN PAN .THE 2.4 ENGINE YOU HAVE TO REMOVE. OXYGEN SENSOR THE ...

Question about 2003 Grand Am

1 Answer

...water pump feed pipe bolts. Remove the thermostat housing to water pump feed pipe. Fig. Thermostat mounting-2.2L engine Remove the thermostat. To install: Install the thermostat. Install the ...

...metal pipe attached to the lower radiator hose. Follow that pipe to the back of the car. It is bolted to the water pump housing. The thermostat is in between the water pump housing and the metal

Question about 2003 Grand Am

1 Answer

...water pump feed pipe bolts. Remove the thermostat housing to water pump feed pipe. Thermostat mounting-2.2L engine 3.1L EnginesDisconnect the negative battery cable. Drain the cooling system to a ...

...water pump underneath the car? change thermostat . if nothing there under housing by the powersteering pump then it dont have one in it ,need to put one in .water pump up on pass. side behind timing ...

Question about 1996 Grand Am

1 Answer

...the metal pipe that runs under the engine and connects to the back side of the engine to the water pump housing. Remove that metal pipe from the water pump housing and the t-stat will be right

water pump feed pipe bolts, remove the thermostat housing to water pump feed pipe. Remove the thermostat. Fig. Thermostat mounting-2.2L engine Hope helps. It is located on the right side of the engine

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...