Questions & Answers for: water nozzle hoover steam cleaner

water stopped in the middle of cleaning caarpet. The brushes do not spin.I have cleaned the filter under the machine and they still do not move.I have also cleaner the nozzle , now have better suction

steam. Is this normal or is something wrong? Thanks for your help.. You might try running a solution of vinegar and water thru it to clean out the lines and spray nozzles. Also are the brushes turning

...water from the front nozzle into the tank) Check the filter in the dirty tank lid, clean if necessary Remove the lower tank and look at the motor cover, locate a round hole, you should see a black ...

...water before storage. The Scotch Guard forms a white glob when it dries and plugs the nozzles. The Scotchguard is going to be dicey inside the Bissell, yes, as you have learned the hard way. I think ...

nozzle hose. If it shoots liquid, there is no pump problem.You have a bad solenoid. There are two solenoids that control water/solution flow after the pump. A gravity solenoid and a pressure solenoid.

...water just flows out and i have to shut the machine off. i have a hoover steam vac dual deep cleaner The most common issue with this is the white nozzle tip broken. sometimes it comes out. it still ...

...The carpet is not intended to get soaked, like what you see with a spray application. If you are seeing a stream of water in the nozzle/tank during the recovery stroke, this is working

water through the nozzle. I called support again, now she had me prime it but it didn't help. the hose and the nozzle are good .I tried using the other nozzle from the first unit I had bought first it

...nozzle and squeegee (if on your model) are free of dirt/lint/hair and attached in their holsters correctly. Make sure you do not have any clogs in the hose. To restore suction, please try the ...

...water. Recovery tank emptied and is sitting properly but still not working. ...