Questions & Answers for: Kenmore water master

Question about 24 in. 15149 Built-in Dishwasher

1 Answer

Master Plumber. Your question: Water comes out of the bottom of the door. I thought it was the seal, replaced it and its still doing it. So the maintinance man changed the motor and its still leaking.

Ad

...cold water available. Master control sometimes will not advance to the next cycle. Master control problem is intermittant. hi. thanks for the question the problem is with the water valve. replace it

Ad

...water will not shut off and begin washing, any tips? (Kenmore 80 series mod 23822100) I have a Kenmore 26842 top loading washer. When you turn on the washer, it won't stop filling. We found this out ...

Question about 23822 Top Load Washer

2 Answers

water. The master valve was not turned on so there was no water going into that hose at all. Hope this helps. Hi, If you set the water selector for cold, do you get cold water? If not, you either have

Question about 54501 Dehumidifier

1 Answer

...water or stay on for long. I have cleaned the filter and have done all the simple things so what is the next solution. The unit may need to be reset. To do this turn OFF the Master ON/OFF Switch. ...

water in our basement. Yikes! So I set up my Kenmore. It has been running for 50 minutes and when I went down to check it, the reservoir is totally dry. Hmmmm... I think there's a problem....?? My

Question about 54501 Dehumidifier

1 Answer

water either. Turn the Master ON/Off Switch to OFF and unplug the unit. Remove the air intake filter and clean it. Allow it to thoroughly dry, before reinstalling it. Once the filter is thoroughly dry

Question about 54701 Dehumidifier

1 Answer

...water and a mild detergent, rinse and dry it thoroughly before reinserting it. Be sure the Master ON/OFF Switch is OFF and the unit is unplugged before removing the filter. Hope this helped you. ...

...water in the bucket, what to do? Diuane, this is usually casued when the bucket is not properly installed onto the unit. The bucket must trigger a safety switch, before the unit will turn ON. Remove ...

Question about 54501 Dehumidifier

1 Answer

...working during the wash cylce. I turn the nob and it does nothing... Washer is full of water. Is there a master reset or any ideas what went wrong? Unplug it, wait for 5 mins then plug it in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwasher Experts

vince

Level 3 Expert

2530 Answers

Paul Carew

Level 3 Expert

3808 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...