Questions & Answers for: watch backplate

...watch that continues to beep hourly and anytime you press a button, regardless of you following your directions you can do the following: 1. Take plate off of the back. 2. Locate audio chime circuit ...

backplate of the watch mechanism, inside which is a gold pin or post that doesn't quite reach past the backplate. There's supposed to be a spring, resting loosely on this post, which (when the back is

backplate of the watch - this spring carried a vibration / beep which echoed off the backplate. Chances are you have damaged this spring during battery change - as i did with my gShock. Basically it's

backplate back on my bulova 96r19 If you cannot snap the back on with your fingers the only safe way to get the back on again is to use a watch press. This is an expensive tool that most jewelers will

...backplate is aligned properly. It just wont snap. Any leads or tips would be appreciated. If you cannot snap the back on with your fingers the only safe way to get the back on again is to use a watch ...

Change battery How change battery Usually, you remove the backplate and then the battery. Replace the battery without touching it by hand and replace the backplate.

Spring fell out while putting smaller battery in. Can't locate where spring goes? the spring goes in a small hole at the back of the watch and locates on the backplate to activate the alarm

I need a backplate screw for a ladie´s Parsifal 9988 Fixya does not sell backplate screws for Parsifal watches.

...watch Hi, The backplate is a "pry open" back. so you will need something like a blade or a hard thin flat object to pry the backplate. once this is done you will have access to the battery. Please ...

does a towerchron qe1 timer fit directly on to a T2002 backplate ? https://www.youtube.com/watch?v=G7s_JdW5txY