Questions & Answers for: washing machine counterweight

Question about Duet GHW9150P Front Load Washer

1 Answer

washing machine ( model GHW9100LW1 whirlpool duet front loder) there is this gray ceramic hard clay ring. It broke. Where do I get the parts to fix it? How do I get step by step instructions on how to

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...counterweight will beat the inside of the machine up pretty good, usually damaging the water pump strainer housing. If this doesn't solve your problem, look at some of the other posts here for other ...

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...washing machine. replaced 3 suspension springs and 1 counterweight spring. not sure where the counterweight spring goes? I do know one side hooks to the rear bracket on which one of the other springs ...

Question about RAX4233PQ Top Load Washer

1 Answer

...washing machine? Check the four suspension rods suspending the outer tub to the top of the cabinet and the counterweight at the bottom front of the tub. Make sure the four suspension rod assemblies ...

Question about RAX4233PQ Top Load Washer

1 Answer

machine 800RL is making a very loud winding noise on the spin cycle. could you please advise me what it is hello , from what you described there could be a few things going on ..: 1..one of the rubber

Question about Duet Sport WFW8300SW 3.4 cu. ft. Front Load Washer

2 Answers

Counterweight Repair Is it worth fixing a 4 year old machine. I opened up the machine after it was violently shaking to find major chunks of the front counterweight on the bottom of the washer. Rear ...

Question about Duet Sport WFW8300SW 3.4 cu. ft. Front Load Washer

1 Answer

...clothing bulks up to one side of the machine. I will take the washing out an will spin but not at full sped It may not be the clothes but the suspension springs and rods, counterweights etc see ...

Question about Duet Sport WFW8300SW 3.4 cu. ft. Front Load Washer

1 Answer

how can I replace the lower counterweight? Hi, Our Aqualtis aqm8d 49 u washer/dryer has been shaking more and more and I've finaaly discovered the problem is the bottom counterweight coming loose. ...

...washing machine. It looks like the front panel is welded. How do I get to it to tighten or replace? No screws holding front panel and sides and back are a single folded piece try from the bottom ...

Question about Duet Sport WFW8300SW 3.4 cu. ft. Front Load Washer

1 Answer

...washing machine and while taking it apart noticed a small crack in the lower counter weight. Could this be causing intermittent problems. It sometimes spins and sometimes doesn't at all. It spins by ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...