Questions & Answers for: washer whirlpool calypso start remaining

Whirlpool washer dryer combo for 26 years without so much as a hiccup. Within months of purchase, I started noticing grey streaks on my clothes. Then I started noticing tears and splits in my clothes.

Whirlpool Calypso Washer starts then stops then starts and stops All of a sudden my washer seems unable to get thru a cycle correctly. It starts then stops, then starts again then stops again and so ...

...whirlpool calypso washer leaks when filling up. It leaks from the bottom, not from the hose my whirlpool calypso washer leaks when filling up, from the bottom , not from the hose. help WATER MAYBE ...

...washer is stuck on 8 minutes remaining. I turned it off and on again after a while and push a button and it still wont work. when i press cancel again it says 8 minutes remaining and wont come off. ...

Washer comes up with 28 in the timer window and won't respond Washer comes up with 28. A few of the LEDs are on - WOOL, SOAK, etc. Doesn't mean anything I guess. Control board seems to be fried - ...

Wshing machine panel shows the numbers 28 and will not shut off. I had just finished doing a wash when the number 28 showd up and now the machine will not operate. I have tried shutting it down and ...

...time remaining doesn't change after 38 minutes Keeps doing the same thing over and over, fills a little, spins for a second then stops and starts from the top. this sounds like a bad timer motor.this ...

whirlpool calypso washer won't drain. ld light comes on .i have open and closed the top. i've restarted the machine numerous times.I even took all the wet clothes out and it still won't drain, agitate

...Whirlpool washing machine with calypso motion is stuck in the wool cycle and can not change to any other cycle. The digital display says 28 and all the other lights or on but will not turn on. when I ...

Whirlpool calypso takes very long The countdown clock is very slow. Says 25 minutes remaining for last 4-5 hours. Machine seems like it is about to start, then stops and restarts. Service call was ...