Questions & Answers for: washer drum fell

...best thing to do in this situation is to empty the washer out, then unplug it and turn the water off at the spigot. Then invert the washer, leaning it back, so as to reach the blades under the

...washer A coin fell in between drum and housing.coin rubs on drum while spinning. how do you access the area between the drum and housing? take off the front panel on the bottom/front of the drum is ...

...on front end load washer If it is a front loader, reach just inside in the drum. Pull the rubber boot up and fell to see if something has gotten between the drum and the rubber boot, maybe a

...drum spins like something fell through the little holes. can i take drum out and check? Sounds like possible bra wire. put head in drum to investigate with torch..good luck check the pump theres ...

...be blocked up check drain hose to pump does it fell with water and does it rinse My front loading washer will not turn the drum, water will run in and pump up but there is no movement from the

...washer to put in new tile flooring. When we put it back the drum appears to be "off". It makes a loud noise. We made sure that the washer was level. Any ideas? maybe a spring fell off that holds the ...

...its spinning the drum is wacking about inside your washer and its going to smash its self to bits as well as rip all the water pipes and wireing off as well????? its an easy fix if you can do

...on the drum if they have fell off or broken away the drum will swing wildly around on spin this will cause the drum to "hit" the inside of the washer,,,check the drum stabilizers are in good ...

my washer turns on all the light go on but when i start the washer it turns off Check for codes Temperator sensor wire may have fell off back of drum code F-24

screws fell out on the drum assembly and now there's no heat two drum mounting screws fell out and now there is no heat in the dryer good because you could have a fire if it actually worked... really